The Paris 195mm truck is your go-to downhill truck. These were built with speed in mind and that is exactly what they do well. Like all Paris Trucks, the baseplate angle is 50 degrees, which provides the perfect balance between maneuverability and stability. If you want even MORE stability, snag yourself some 43 degree paris baseplates seperately and you'll have the option of running a grippier split angle setup, or the maximum-stability setup of 43 degree baseplates all around. The 195mm hanger allows for less leverage when compared to a narrower hanger, which adds to stability and comfort at higher speeds. These trucks are ready to race out of the box! The 195s are built with 2 – 90a Divine bushings and a flat washer on top below the kingpin nuts. Get some!

All skateboard trucks are sold as single items, one truck = 1 unit.

FEATUES

356.2 virgin aluminum gravity molded baseplate and hanger
Secondary heat treatment process for added strength and durability
Grade 8 steel axles and kingpins
6-hole baseplate drilled both new school and old school
Special Divine Urethane bushing formula for ultimate rebound and vibration dampening

SPECS

Hanger width: 195mm
Axle width: 245mm (9.6”)
Axle height: 65mm
Weight: 462 grams (16.3 oz)

What Size Trucks Do I Need For My Board?

*Deck range recommendation varies depending on type and width of wheels

Independent trucks come with 90A stock cushions (also called bushings). If you like softer or harder cushions, they can be purchased separately from Independent's Genuine Parts.

Krux trucks come with 92A stock cushions (also called bushings). If you like softer or harder cushions, they can be purchased separately from Krux Trucks Hardware.

All non-forged models in 109, 159, 169, and 215 sizes come with 6 hole baseplates. All Stage 4 sizes come with 6 hole baseplates. The 6 holes baseplates are compatible with both current decks and old-school ones.